Since that pretty 57 Chevy left the shop 4 vastly different vehicles and Challenges have come and gone. A 1955 Chevy Convertible had some under car termites. A set of floor pans had been replaced but nothing was done with the supports that hold the floor to the frame. Some were rotted through and some were not attached at all. We lifted the body up about 6 inches, very carefully and removed the old and replaced with new. The car is alot safer and rides and drives a lot better than when brought in. We fixed some small dents on the outside for the customer and did some partial panel spot work. Customer loved it!
When finished repairs were undectable! A full Chassis off restoration for this 1978 Ford Bronco. What looked like a good truck from a few feet back had 4 paint jobs and some rust issues including The floor pan and front firewall. We took it off the frame put it on our rotisserie, It had all the holes welded up, stripped to bare metal, painted and rebuilt the frame and suspension components. We then used bedliner under the truck and an insulation on top of the floor to reduce heat and noise. Although it is not finished yet it is almost time for the new driveline to go in. It will sport a 360 cubic inch Ford Modified with a C-6 transmission, A/C, custom pearl gray paint and a custom interior.
I will post some of the other cool projects soon!
Remember we do the best collision repair around and if you need deductible assistance... We do that too.
